Introduction to hose withhold machine works

Introduction to hose withhold machine works

Hose withhold other fittings works by oil pump installed on the tank to immerse in the hydraulic oil to achieve scientific and heat dissipation mute design, pump under the motor driver, the output of the hydraulic oil, promote withhold the plunger motion inside the cylinder, the radial shrinkage mold base, realize the extrusion mould for hose connector coat. When shrinkage to micrometer predetermined value, extrusion automatically stop, electromagnetic directional valve after reversing, plunger reverse motion within the cylinder, mould with open, withhold hose.

Withhold operation

1, pressure pipe used for the first time shall be withheld without load for 20 ~ 30 times, observe the different parts are normal rear can use.

2, pressure pipe in winter should be light when using 20 ~ 30 times, has been trying to make the oil temperature is higher.

3, press the open button, open after the mold base according to withhold the hose specification choose corresponding mould is installed on the mold base, and adjust the micrometer scale.

4, place set good joint hose in a pressure pipe position within the nose, making a withhold full length.

Withhold operation on 5, withhold button, until pressure pipe head stop withhold automatically open mould.

6, remove withhold good hose assembly, using vernier calipers joint detection after withhold the coat outer diameter size, such as inconsistent with the argument list should be fine-tuning micrometer scale, until that accords with a requirement under a piece of rubber hose withhold them.