Hose crimping machine is a pipe assembly for the withholding of hydraulic

Hose crimping machine is a pipe assembly for the withholding of hydraulic equipment, which will be by supporting the contractile force exerted by the metal connector crimping machine mold, the metal connector firmly on the high-pressure tubing or withhold car by supporting the construction machinery the brake pipe, oil pipe, air pipe, power pipe. Crimping machine is suitable for all types of mechanical high and low pressure tubing, pipe, pipe, cable connectors, automotive air-conditioning pipes, automotive power steering pipes, oil pipes, gas supply pipes, and construction accessories, household hot water pipe withhold widely used vehicles, engineering metrichydraulic fittings, hydraulic machinery, welding equipment and other industries.
Steps
1. Use a ruler to measure the length of the sample hose.
2. Measure the metal connector with a caliper data observed sample hose inside diameter.
3. Prepare the required hoses and fittings.
4. pipe cutting machine cutting length, clean the hose bore hose needed.
5. The outer layer of rubber hose stripped with stripping plastic machine, and then insert a metal hose connector sleeve. Note: You must peel off the outer layer of rubber hose.
6. The metal connector is inserted straight hose directly to the bottom of the core.
7. Measure whether the same hose and hose length of the sample.
8. shrink tube with no taper metrichydraulic hose fittings hose.
9. The transfer hose will withhold data provided by prospective locators.
10. start withhold hose, you can use the manual buttons or use the foot withhold withhold button.
11. hose crimping place to locate the alarm sounds, and then press the button to open the mold.
12. withhold withhold data caliper measurement is completed, with the probe detection.
13. hose to withhold the data can be specified.