Analytical deduction of the machine safety rules

Analytical deduction of the machine safety rules
Deduction of the machine when using the pump installed in the hydraulic oil in the tank to soak in the quiet cooling design a scientific purpose, motor-driven pumps, hydraulic oil output, push the plunger movement withhold tanks, resulting in mold base radial contraction, hose fittings to achieve the mold for extrusion coat. When the contraction reaches a predetermined value micrometer, squeezing automatically stop solenoid valve for backward, reverse movement of the piston within the cylinder, along with open mold, withhold hose complete.
Deduction of the machine to use to pay attention to the use of safety norms.
1, the deduction of the hose crimping machine electrical boxes are not free to open, something electrician.
2, stop using the machine, you must turn off the main power switch knife.
3, in the mold must be shut down for replacement, (special attention).
4, eight blocks and ramps between the front plate should be kept clean, can not have metal shavings and other hard objects stuck on an incline, a day before starting the lubricant must be injected to maintain lubrication.
5 screws on the module must always check for loose before loading module must tighten the screws.
6, in the use of automatic deduction of the hose cutting machine must be taken to withhold the hand when the safety hose fittings.
7, when the process of adjusting the micrometer regulator deduction best pressure hose in one hand and adjust the micrometer, the remaining parts of the body do not touch the machine.
8, must be checked each time before turning on the micrometer regulator lead wires and terminals are reliable contact, when micrometer regulator from large to small adjustment must first release the locking block after crimping machine performed to avoid human error.
9, crimping machine must have the person responsible for maintenance and operating personnel must be familiar with the operating procedures withhold machine.
10, the operator must not try anything other than pressure hose.
11, in the course of the operation, if unexpected phenomenon should be immediately shut down, and to find relevant personnel for inspection.
12, turn off all power to withhold completed and lock control electrical box.