Bsp swivel fittings installation should pay attention to

Bsp swivel fittings installation should pay attention to:
1, the rotary Bsp fitting in the handling and storage process should avoid collision and fall, in order to avoid damage to the interface and internal parts.
2, the rotary joint installed concentrically as possible in order to ensure the good functioning of the rotary joint.
3, the rotary joint threaded connections during the installation, you should pay attention to the inner and outer tube is threaded to the direction of rotation of the corresponding drum and threaded to the inner and outer pipes should also be consistent.
4, the connection between the rotary joint and piping must be connected to a hose (we recommended to use good scrambling metal hose), the absolute prohibition of rigid connection.
5, the rotary joint entrance as directly connected with the hose. To relieve joint auxiliary weight and prolong life.
6, assembly, pay attention to the size and weight of the inner tube with auxiliary support. With the inner tube and fitting within the rotating rotary joint recommended H8 / e7 of tolerances.
7, the rotary joint rotation stopper should be properly supported and generally rod diameter should be smaller than the rotation preventing hole 2mm, so as not to affect the free adjustment of the rotary joint and compensation.