bsp swivel fittings pre-installed

(1) double heads and manifolds: From lubrication pump out until all the oil inlet distributor, under relatively high pressure. Usually cold drawn seamless steel pipe, the material is 10 or 15 gauge steel. Never use severe corrosion of the pipe;
(2) to the pipeline: jic female fittings from the female swivel fitting distributor to all lubrication points inlet port (bearing hole), withstand the pressure is relatively low. Usually drawn copper, easy to bend when the pipe. There is also cold drawn seamless steel or stainless steel tube;
(3) ferrule pipe fittings the use of hose fittings to connect the face of moving parts.
. Piping layout requirements
(A) pipeline to try to avoid the heat radiation and cooling water temperature is too high or too low spray and other place, especially hose fittings;
(2) piping and other equipment should not affect the operation of the host, to be safe, reliable, easy to work, observation, maintenance;
(3) To smooth vertical and horizontal piping, neat appearance. As little as possible, or small-angle bend elbows, using a large arc, thereby reducing oil flow resistance;
When the conflict (4) installation occurs, a small tube allows bassoon, low-pressure pipe so that the high-pressure pipe;
(5) pipeline crossing each other when not in contact, shall be separated a certain distance;
(6) parallel to the pipeline joints to stagger the installation, so as not to affect the installation and removal;

H type swivel fittings is designed to apply to the cooling aspects of the design of the series, it has small size, light weight, the advantages of small friction torque force. Uses a balanced seal, friction material according to the media environment group, choose a variety of impregnated graphite, bronze, tungsten carbide, silicon nitride, such as different groups of right, enough to resist rust, scale, impact debris and other impurities on the sealing surface Our seal is done on CNC machine tools and special grinding machine, mirror-like surface, the sealing more reliable. High pressure female swivel fitting housing made of stainless steel or carbon steel materials processing high standard, multi-channel collision pressing device, avoid high pressure inflation. Hollow shaft after heat treatment, to prevent high pressure deformation and solve the problem of high pressure seal ineffective. For media including chemicals, hydraulic oils and the like. Require a high-pressure state machinery hydraulic machines, punching equipment, and other high-speed rotating equipment: For industry.

Structural features Parher JIC female swivel fitting

Structural features Parher JIC female swivel fitting
Hollow shaft is connected by a threaded or hydraulic flange onto the roller or rollers, as the main rotating parts, and equipment for the synchronous movement. Double seal ring with hollow shaft and bellows sealed together to form a floating friction, help reduce due to the large, heavy equipment brought seal concentricity bad and other shortcomings. Seal ring by a maceration of carbon graphite, have good self-lubricating properties, reducing friction and wear, improve the life; after the seal ring wear by means of a spring bellows pressure compensated at any time. Bearings using one hand to play a supportive role, but also enhance the rotating
accuracy and reduce the friction torque. In addition, with observation hole on the housing, by observing the hole may be observed at any time to wear and seal the sealing ring.

BSP swivel fitting maintenance methods

BSP swivel fitting maintenance methods:
1, the swivel fittings should be kept inside the drum and pipe cleaning. The new equipment should pay particular attention to the need to add a filter, if necessary, in order to avoid abnormal wear caused by foreign matter on the swivel fittings.
2, due to the use of the machine for long periods can cause internal scaling and jic female swivel fitting from rust, please note that there will be card dead or leakage occurs when situations such as re-use.
3, with oiling device periodically oiling, to ensure the reliability of the swivel fittings bearing operation.
4, the swivel fittings fluid medium students should gradually warm to avoid abrupt changes in temperature.
5, check the wear condition of the sealing surface and the thickness variation (normal wear and tear is 5--10mm); observe the sealing surface of the friction track, to see whether there is intermittent or three, scratches and other issues, if the situation on the case, It should be replaced immediately.
6. The swivel fittings should be gently prohibited by the impact, in order to avoid the loss of the joint member.
7, prohibited foreign matter into the rotary internal connectors.
8, the swivel fittings not long-term idling.

BSP swivel fittings is a rotary mechanical seal

BSP swivel fittings is a rotary mechanical seal, which is fixed and rotary roller conveyor line and exclude the heat transfer medium. Heat Equation swivel fittings media including steam, water, oil, hydraulic oil and coolant. female swivel fitting support and rotation stopper should be appropriate, generally rod diameter should be smaller than the rotation preventing hole 2mm, so as not to affect the free rotation of the adjusting joints and compensation. Note that the inner and outer tube threaded whether the direction of rotation of the drum corresponds to ensure the good functioning of the swivel fittings.

jic thread swivel fittings should also be consistent

Rotation to the inner and outer jic thread swivel fittings should also be consistent
1, the swivel fittings in the handling and storage process should avoid impact and dropping.
2, as installed concentric.
3, the female swivel fitting for screwing in the installation, in order to avoid damage to the interface and internal zero member.
4, the connection between the swivel fittings and the pipe to ensure a good operation of the rotary joint.
5, the swivel fittings entrance as directly connected with the hose. To relieve joint auxiliary weight, compared to about adapter.
6, the inner tube assembly, you must use the hose connection (we recommend the use of the company scrambling good metal hose), rotation. And threaded to the inner and outer pipes should also be consistent.
7, support and stop rotation of the swivel fittings to be properly and prolong life. Four-way rotary joint learning.

Parher JIC female swivel fitting itself is rotated 360 °

Parher JIC female swivel fitting itself is rotated 360 °, so about him, regardless. People around the mouth of the so-called spin, in fact, the direction of the thread, the thread that is the direction we swivel connectors at one end of the thread device is orthodontic, or anti teeth. So what is the orthodontist and anti-tooth it? In our mouth said left-handed, he is anti-tooth tightened when connected to rotate counterclockwise. Instead handed is an orthodontic clockwise tightened. So when you purchase a female swivel fitting, often figure out what is spin around, it is easy to cause the machine can not purchase and anxious.