BSP swivel fitting maintenance methods

BSP swivel fitting maintenance methods:
1, the swivel fittings should be kept inside the drum and pipe cleaning. The new equipment should pay particular attention to the need to add a filter, if necessary, in order to avoid abnormal wear caused by foreign matter on the swivel fittings.
2, due to the use of the machine for long periods can cause internal scaling and jic female swivel fitting from rust, please note that there will be card dead or leakage occurs when situations such as re-use.
3, with oiling device periodically oiling, to ensure the reliability of the swivel fittings bearing operation.
4, the swivel fittings fluid medium students should gradually warm to avoid abrupt changes in temperature.
5, check the wear condition of the sealing surface and the thickness variation (normal wear and tear is 5--10mm); observe the sealing surface of the friction track, to see whether there is intermittent or three, scratches and other issues, if the situation on the case, It should be replaced immediately.
6. The swivel fittings should be gently prohibited by the impact, in order to avoid the loss of the joint member.
7, prohibited foreign matter into the rotary internal connectors.
8, the swivel fittings not long-term idling.