2016年1月26日星期二

jic female swivel fitting installation knowledge

jic female swivel fitting installation knowledge
1, the swivel fitting handling and storage process should avoid collision and fall, in order to avoid damage to the interface and internal parts.
2, as installed concentric to ensure the good functioning of the swivel fitting.
3, the bsp swivel fittings connection during installation, should pay attention to the inner and outer tube threaded whether the direction of rotation of the corresponding drum and threaded to the inner and outer pipes should also be consistent.
4, the connection between the jic thread and the pipe, you must use a hose connected to the absolute prohibition of rigid connection.
5, the swivel fitting entrance as directly connected with the hose. To relieve joint auxiliary weight and prolong life.
6, assembly, pay attention to the size and weight of the inner tube with auxiliary support. With the inner tube and fitting within the rotating swivel fitting recommended H8 / e7 tolerance fit.
7, the swivel fitting support and rotation stopper should be appropriate, generally rod diameter should be smaller than the rotation preventing hole 2mm, so as not to affect the free rotation of the adjusting joints and compensation.

没有评论:

发表评论