Rotary joint installation Precautions

1, jic swivel fittings through precision manufacturing, the transport and storage process should avoid collision, so as to avoid damage to the interface and internal parts.
2, the installation and the connecting shaft concentric need to ensure the good functioning of the rotary joint.
3, the rotary joint threaded connection during installation, should pay attention to the inner and outer tube threaded whether the direction of rotation of the corresponding drum and threaded to the inner and outer pipes should also be consistent.
4, the connection between the rotary joint and piping must be used hose connection (we recommend the use of the company scrambling good metal hose), the absolute prohibition of rigid connection.
5, the rotary joint entrance as directly connected with the hose. To relieve joint auxiliary weight and prolong life.
6, assembly, pay attention to the size and weight of the inner tube with auxiliary support. With the inner tube and fitting within the rotating rotary joint recommended H8 / e7 tolerance fit.
7,bsp swivel fittings support and rotation stopper should be appropriate, generally rod diameter should be smaller than the rotation preventing hole 2mm, so as not to affect the free rotation of the adjusting joints and compensation.