Bsp swivel fittings installation should pay attention to

Bsp swivel fittings installation should pay attention to:
1, the rotary Bsp fitting in the handling and storage process should avoid collision and fall, in order to avoid damage to the interface and internal parts.
2, the rotary joint installed concentrically as possible in order to ensure the good functioning of the rotary joint.
3, the rotary joint threaded connections during the installation, you should pay attention to the inner and outer tube is threaded to the direction of rotation of the corresponding drum and threaded to the inner and outer pipes should also be consistent.
4, the connection between the rotary joint and piping must be connected to a hose (we recommended to use good scrambling metal hose), the absolute prohibition of rigid connection.
5, the rotary joint entrance as directly connected with the hose. To relieve joint auxiliary weight and prolong life.
6, assembly, pay attention to the size and weight of the inner tube with auxiliary support. With the inner tube and fitting within the rotating rotary joint recommended H8 / e7 of tolerances.
7, the rotary joint rotation stopper should be properly supported and generally rod diameter should be smaller than the rotation preventing hole 2mm, so as not to affect the free adjustment of the rotary joint and compensation.

Female swivel fitting work to follow the case to select quick mode

Female swivel fitting work to follow the case to select quick mode. Transmission medium inlet to follow the work of the freedom to choose sides or rear to enter. Sealing surface and seals made of special material, abrasion resistance, long life, corrosion resistance, not leak. There are two internal jic female swivel fitting precision bearings, smooth operation, durable, strong and flexible, friction coefficient is small, it can be high speed. Internal seal wear condition by visual appearance of the product that can prevent mechanical stop or mechanical damage to achieve preventive effect and reduce losses.

Maintenance jic female swivel fitting

Maintenance jic female swivel fitting:
1, the swivel british fittings should be kept inside the drum and pipe cleaning. The new equipment should pay particular attention to the need to add a filter, if necessary, in order to avoid abnormal wear caused by foreign matter on the rotary joint.
2, due to long-term use can cause the machine rotary joint internal scaling and rust from Please note there will be card dead or leakage occurs when situations such as re-use.
3, with oiling device periodically oiling, to ensure the reliability of the rotary joint bearing operation.
4, the rotary joint body medium heat circulating students should gradually warm to avoid abrupt changes in temperature.
5. Check the sealing surface of the wear condition and thickness changes; observe the sealing surface friction track, to see whether there is intermittent or three, scratches and other issues, if the situation on the case, should be replaced immediately.
6. The rotary joint should be gently prohibited by the impact, in order to avoid the loss of the joint member.

Female swivel fitting practical application

Female swivel fitting through the practical application and theory of pump mechanical seal on the analysis of the actual mechanical seal and mechanical seal sealing effect not only related to their performance, and with the proviso conditions and seal support systems and other components has offered to provide important relationship, so in the design of the pump unit product, to provide a favorable external conditions for the use of mechanical seals. Rotary connector fitting through pump mechanical seal pumps in its application in a very wide prospect will be more extensive.